flexpcb.orgFLEXPCB.ORG / informational
Single-Sided Flex PCB: Construction & Design Tradeoffs
Get a Flex PCB Quote ↗One copper layer
Single-sided flex places the circuit pattern on one conductive layer. It can be a useful starting point for a simple interconnect when routing can be completed without crossing conductors.
Define access and protection
Describe pad access, coverlay openings, reinforcement and connection method. One copper layer does not by itself establish the complete stackup thickness or the required bend radius.
Check the motion requirement
A thin construction can help reduce bending strain, but continuous motion still requires a suitable material system, geometry and test plan. Use finished thickness and a qualified design review.
Make the requirements reviewable.
| Define | Include in the review | Why it matters |
|---|---|---|
| Mechanical duty | Installed shape, bend location, motion and cycle target | Distinguishes installation bending from service fatigue |
| Construction | Layer order, copper, film, adhesive and coverlay | Establishes finished thickness and material compatibility |
| Interfaces | Connector thickness, pad finish and local reinforcement | Controls fit, assembly support and contact reliability |
| Acceptance | Dimensions, electrical test and applicable standard revision | Creates an agreed basis for inspection and quotation |
CONTINUE THE DESIGN REVIEW
Connect the decisions.
YOUR NEXT STEP
Bring the requirements.
Start the conversation.
Tell us what the circuit needs to do, how it will bend and when you need it. A complete build brief makes a quote easier to evaluate.
Preparing files?
Include Gerber and drill data, a fabrication drawing and stackup notes. Put related files in one ZIP. Add a BOM and placement file when assembly is required.