flexpcb.orgDefining Defined Impedance
What is Defined Impedance? Defined impedance, also known as controlled impedance or matched impedance, is a key concept in electronic circuit design, particularly in high-speed digital and radio…
Flex PCB engineering articles
Explore the archive, or start with the current flexible circuit design guide.
Thermal inertia – what it is and what are its effects
What is Thermal inertia? Thermal inertia is a measure of a material’s ability to store and release heat. It is determined by the material’s thermal conductivity, density, and…
Image the outer layers.
Introduction In the realm of digital imaging, understanding and manipulating the outer layers of an image is a crucial skill for professionals and enthusiasts alike. This article delves…
What is UL Marking?
Introduction to UL Marking UL (Underwriters Laboratories) Marking is a certification mark that indicates a product has been tested and evaluated by UL, a global safety science company,…
What is Inner Layer Pad Insulation?
What is ILPI Made Of? ILPI is typically made from a combination of materials, including: Fiberglass Mineral wool Polyester Recycled cotton Other synthetic fibers These materials are often…
What is the Shipment Date?
Importance of the Shipment Date The shipment date is important for several reasons: Inventory Management: The shipment date helps businesses plan their inventory levels. By knowing when products…
White paper – suitability of an enhanced low melting point alloy for a handheld device.
Introduction to Low Melting Point Alloys and Their Applications Low melting point alloys, also known as fusible alloys, are metal alloys that have a melting point below 450°F…
Where to place the PCB in the oven?
Introduction to PCB Placement in Reflow Ovens Printed Circuit Board (PCB) assembly is a crucial process in electronics manufacturing, and reflow soldering is a widely used technique for…
What is via covering in PCB?
Introduction to Via covering Via covering is a crucial process in the manufacturing of printed circuit boards (PCBs) that involves filling or plugging the vias with a non-conductive…
What is UL certification and How to mark it on the circuit board
What is UL Certification? UL (Underwriters Laboratories) certification is a safety certification that ensures a product meets specific safety standards and requirements. It is a widely recognized and…
YOUR NEXT STEP
Bring the requirements.
Start the conversation.
Tell us what the circuit needs to do, how it will bend and when you need it. A complete build brief makes a quote easier to evaluate.
Preparing files?
Include Gerber and drill data, a fabrication drawing and stackup notes. Put related files in one ZIP. Add a BOM and placement file when assembly is required.